FAQ

It is a widely used commercial term for polymer sheets used as concrete formwork facing. When evaluating the product, the polymer type (PP or PVC), internal cross-section, dimensions, and manufacturer instructions must be assessed together.

No, they belong to different material families. Having the same nominal thickness does not imply identical weight, stiffness, or handling conditions; products should be compared using verified technical data.

No. PP, PVC, and various polymer composites exist on the market. In SerPlywood quotations, the exact polymer matrix and internal structure are clearly stated.

The polymer name alone is not a sufficient selection criterion. Internal cross-section (solid, honeycomb, or fluted), weight, test certificates, jobsite temperature ranges, and pricing must all be evaluated together.

Not always. Some hybrid products have a timber/plywood core with a plastic film or overlay. The core material and the surface must be evaluated separately. SerPlywood provides homogeneous solid/cellular polymer boards.

They describe the internal cross-sectional geometry of the board. Honeycomb and cellular structures provide lightweight handling, while solid core boards offer different deflection and impact dynamics.

The operating model is specialized polymer formwork procurement, supply, and direct project delivery. Manufacturing and authorized distribution credentials are fully specified within institutional documentation.

Manufacturer declarations and technical compliance certificates must be examined. Recycled content ratios and polymer origins vary, and SerPlywood provides verified technical documentation for material compliance.

SerPlywood plastic formwork boards are standardly produced in White (Standard White). Upon project requirements, Custom Gray and Custom Black options can also be manufactured.

Our standard board dimension is 125 × 250 cm (1250 × 2500 mm = 3.125 m²). An optional 62.5 cm width and custom-cut lengths are available for columns and beams. Thicknesses and net sheet weights are: 15 mm (28 kg / 8.96 kg/m²), 18 mm (32 kg / 10.24 kg/m²), and 21 mm (41 kg / 13.12 kg/m²).

Thickness alone does not determine full suitability. Polymer structure, fresh concrete hydrostatic pressure, support joist spacing, and framing connections must be evaluated within a proper formwork design.

There is no single support spacing applicable to all polymer boards. It must be determined from the manufacturer load-deflection tables and permissible deflection limits (e.g. L/500) for the specific concrete slab thickness.

Yes, products certified for slab loads can be safely deployed over H20 timber beams, table forms, or steel framing systems.

Yes, when the framing is engineered for the concrete pour rate and lateral hydrostatic pressure, they perform exceptionally in wall and column panels.

Yes, its ultra-smooth, non-porous surface delivers superior exposed concrete finishes without requiring plastering. A representative on-site mock-up is recommended before full-scale deployment.

Water resistance is the greatest advantage over timber (zero swelling or delamination). However, deflection under load and thermal expansion must still be engineered properly.

Thermopolymers expand in heat and gain rigidity in severe cold. Therefore, an expansion joint gap (1.5 – 2 mm) recommended by the manufacturer should be maintained at board joints.

Yes, they can be easily cut using standard circular saws or hand woodworking tools. Using a blade with appropriate teeth ensures clean, burr-free edges.

Yes, standard framing nails, screws, and formwork clamp fixings can be applied. The polymer structure grips fasteners securely and does not splinter, split, or delaminate after repeated fastening.

Because polymers do not chemically adhere to concrete, release agent requirements are minimal and often eliminated in routine pours. For pristine architectural finishes, a light water-based release agent may be applied.

Depending on jobsite practices, handling care, and stripping discipline, boards achieve between 40 and 80+ concrete pours. This is a field-observed operational range under proper maintenance rather than an unconditional guarantee.

Inquire about the exact test conditions, framing support, concrete mix, and jobsite handling practices. Any figure should be corroborated with real site records and laboratory testing rather than arbitrary claims.

Because formwork lifespan heavily depends on site workmanship, crane handling, and stripping procedures, warranty scopes and technical terms are specified conditionally in formal quotation contracts.

Clean immediately after stripping using high-pressure water washing or plastic/wood scrapers. Avoid sharp metal scraping tools or heavy hammering to preserve the face texture.

Yes, surface gouges, deep scratches, or accidental drill holes can be easily repaired using hot-air polymer welding, welding rods, or polyurethane plugs, restoring a flush surface.

Boards should be stacked horizontally on flat timber dunnage or original shipping pallets. For prolonged outdoor storage, covering with protective tarpaulins prevents excessive thermal buildup.

Yes, product sample kits and pilot test boards are provided for contractors, developers, and engineering firms. You can submit an inquiry via our Sample Request form.

Small hand samples are ideal for evaluating material density, surface finish, hardness, and waterproofing; full-span deflection and framing behaviors should be observed in actual site mock-ups.

No, a Technical Data Sheet summarizes typical physical and mechanical properties, whereas an accredited laboratory test report documents empirical test values for tensile, flexural, and impact performance.

Logos alone are not sufficient. Accreditation body credentials, scope of certification, relevant standard compliance (ISO, CE), and report validity dates must always be verified.

Pricing is determined by polymer type (PP/PVC), thickness (15, 18, 21 mm), order volume (sheets, pallets, full container/truckload), and delivery terms (jobsite, warehouse, or seaport).

A standard sheet (1250×2500 mm) covers 3.125 m². The price per m² is calculated by dividing the sheet price by 3.125. When comparing boards of different formats, always use the square meter price as the baseline.

Our formal quotation specifies product technical details, unit sheet and m² price, quantity, pallet packaging, applicable taxes/duties, lead time, and freight delivery scope.

Divide total contact area (m²) by sheet area (3.125 m² for 125×250 cm) and incorporate a 5–10% safety margin for cutting loss. Our online Formwork Quantity Calculator automates this calculation.

Domestic orders can be settled via bank transfer, card, or cash. International export orders are handled via Wire Transfer (T/T) or Letter of Credit (L/C) under agreed commercial terms.

No, cost-per-use figures are parametric engineering models based on purchase price and targeted reuse cycles. Actual site stripping care and maintenance determine actual realized savings.

Domestic quotations state VAT terms explicitly. Export quotations are issued net of domestic VAT under Incoterms (FOB, CIF, CFR); local import customs duties and VAT in the destination country are the buyer responsibility.

Yes. Bulk purchases based on full truckloads (FTL) or 40' HC container loads benefit from favorable project discounts due to optimized manufacturing and consolidated freight.

Domestic orders are typically handled on a full pallet basis (standard 40–50 sheets), while export deliveries require 20' or 40' container loads. Contact sales for specific site requirements.

Simply share your required board thickness, dimensions, estimated sheet count or square meters, formwork application (slab, wall, column), and destination delivery location.

We supply international contractors and distributors across Europe, the Middle East, North Africa (MENA), Gulf regions, Central Asia, and worldwide via container and truck freight.

A 40' High Cube container holds 16 pallets (~720 sheets / 2,250 m²), a 20' container holds 8 pallets (~360 sheets / 1,125 m²), and a standard mega truck carries 16–18 pallets (~700–800 sheets) for 18 mm boards.

We operate under EXW (Ex Works), FOB (Free on Board), CFR (Cost and Freight), CIF (Cost, Insurance and Freight), and CPT/DAP terms depending on buyer preference.

Complete documentation including Certificate of Origin, Movement Certificates (ATR, EUR.1), Bill of Lading, Packing List, and Commercial Invoices are prepared professionally.

In-stock inventory is dispatched to the port or terminal within 48 hours. For customized production or large volumes, typical factory lead time is 7 to 15 business days.

In-stock domestic orders are dispatched within 1–3 business days. Custom dimension orders or ocean freight container shipments are prepared within a 7–15 business day lead time.

Yes, beyond standard 125 × 250 cm sheets, 62.5 cm column widths and custom lengths tailored to your formwork modules can be manufactured subject to minimum production quantities.

Submit your requested thickness, board count or total square meters, and preferred Incoterm with port of destination (CIF/FOB) to receive a detailed proforma invoice within 24 hours.

Note any visible packaging discrepancies on the delivery note or CMR/Bill of Lading, take clear photographs before unloading, and inform our customer representative immediately.

Yes. We provide sample pieces to contractors and commercial buyers via international courier so you can inspect cross-section, weight, and surface quality first-hand.

SerPlywood is the registered brand of CFY Engineering Ltd., delivering high-performance polymer formwork boards backed by engineering support, transparent pricing, and structured global logistics.

Quotation, technical specifications, and project evaluation are led by our Senior Architect, Mr. İdris YAĞMAHAN.

You can submit the Partnership form on our website or contact our management directly with your company background, territory, and expected purchase volumes.

Exclusive distribution agreements for specific territories or countries can be negotiated with established partners who commit to defined annual purchase volumes.

Our headquarters is located in Maltepe, Istanbul, Turkey. Logistics and distribution hubs operate along Istanbul major transit highways with easy port access.

We support partners with certified technical data sheets, load-deflection tables, product samples, documentation, and engineering support for major project tenders.

We are open Monday through Saturday from 08:30 to 18:30 (UTC+3). You are welcome to visit our offices and inspect board samples by scheduling an appointment.

With high-capacity automated production lines and regular buffer inventory, we ensure continuous supply for major infrastructure projects and international export shipments.

1. You submit your requirements, 2. We present a scoped formal quotation, 3. Upon confirmation and payment terms, pallets are loaded and dispatched directly to your jobsite or designated port.

Yes. SerPlywood boards are made of 100% recyclable thermoplastic polymers. After completing their extensive service life, they can be reground and recycled, leaving zero timber deforestation impact.